Большие линейные защелки из нержавеющей стали SK311

Характеристики товара

MATERIAL ADVANTAGE: Stainless steel is a corrosion and abrasion resistant material, commonly used in high-end locks.
Safety: stainless steel is resistant to damage and has good safety performance.
Convenience: Pressing is the operation that

Сценарии применения

In the field of construction and engineering machinery: toolboxes and equipment boxes of engineering machinery (such as cranes, loaders, etc.) at construction sites
Energy facilities: in power stations, substations, power distribution cabinets, energy storage equipment cabinets and other facilities.
Industrial equipment field: widely used in control cabinets and electrical cabinets of industrial equipment such as large machine tools, injection moulding machines, stamping presses, etc.
In the building HVAC industry: applied on large pipes of heating, ventilation and air conditioning (HVAC) systems in buildings

Other models: Застежка-защелка для безопасной двери

Пять часто задаваемых вопросов
Problem 1: Latch lock is difficult to insert or pull out of the shackle
Solution: Check the surfaces of the latch and carabiner for obvious signs of wear or deformation. If there is slight wear, you can use sandpaper to sand the surface to make it smoother; if the deformation is serious, you may need to replace the latch or latch parts.

Problem 2: Loose or unstable latch after installation
Solution: Deviation in the hole position may result in the latch not fitting tightly after installation. At the same time, check whether the mounting screws are loose, if so, tighten the screws using the appropriate tools.

Problem 3: Rust and corrosion of the latch
Solution: Although it is made of stainless steel, if the quality of the stainless steel is not up to standard (e.g. the alloy composition does not meet the standard), it may still rust. If the rust is slight, you can use stainless steel cleaner and a soft cloth to wipe and remove the rust.

Problem 4: The locking strength of the latch is not enough, easy to open accidentally
Solution: Check if the latch is too short or too thin and consider replacing it with a stronger, properly sized latch.

Problem 5: Latch failure in low or high temperature environment
Solution: When designing and installing the latch, consider reserving a certain amount of expansion and contraction space for the latch, or choose a latch model that can adapt to a wide range of temperature changes.