Цинковый сплав промышленный шкаф дверь петли HL023-2

Характеристики товара

Advantage of zinc alloy material: made of zinc alloy with good casting performance
Better corrosion resistance: zinc alloy surface will naturally form a dense oxide film
High durability: combining its corrosion resistance, smooth opening and closing properties and good load-bearing capacity.

Область применения

Automation control cabinets: in the control cabinets of various automated production lines, industrial robot control and other systems.
Distribution cabinets: in factories, substations and other places in the distribution cabinet
Instrumentation control cabinets: instrumentation control cabinets used in laboratories, testing workshops, etc.

Другие модели：Поворотный шарнир из цинкового сплава

Пять часто задаваемых вопросов
Question 1: Is the corrosion resistance of zinc alloy industrial cabinet door hinges sufficient in an industrial environment?
Answer: Zinc alloy itself has a certain degree of corrosion resistance, which is sufficient in general industrial environments, such as places where there is a small amount of dust, light oil and humidity changes.

Question 2: How to ensure that the load-bearing capacity of zinc alloy industrial cabinet door hinges meets the demand?
Answer: Manufacturers will design the structure and size of the hinges according to the common weight and usage scenarios of industrial cabinet doors to ensure that they are strong enough to bear the load.

Question 3: Will zinc alloy industrial cabinet door hinges wear out after frequent opening and closing? How to avoid it?
Answer: It is mainly due to the friction of the pivot part and the interaction between the connecting parts. To avoid excessive wear, the pivot of the hinge is usually finely machined during the manufacturing process and lubricants may be added to reduce friction.

Question 4: What are the precautions during the installation of zinc alloy industrial cabinet door hinges?
Answer: Before installation, make sure that the mounting surfaces of the cabinet door and cabinet are flat, clean and free from impurities such as oil and rust.

Question 5: What if the zinc alloy industrial cabinet door hinges are loose?
Answer: Firstly, check whether the fixing screws are loose. If the screws are loose, use the appropriate tools to tighten the screws, pay attention to tighten the strength to be uniform, to avoid the screws slip wire.