Industrial equipment cabinet door release hinge CL231-3

Product Features

Removable design: with a structure that is easy to dismantle
Connection mode: able to realise the flexible connection between the cabinet door and the cabinet body.
Load-bearing capacity: capable of carrying heavier industrial equipment cabinet doors
Adaptability: can be applied in various environments

Scope of application

Machine tool equipment: Used in control cabinets, tool cabinets and other cabinet doors of machine tools.
Chemical control cabinets: control cabinets need to strictly control the internal environment, to prevent corrosive gases from entering
Electronic equipment chassis: such as computer server chassis, electronic instrument chassis, etc.

Other Models：Removable Corner Insert Hinge

Five Frequently Asked Questions

Problem: The cabinet door opens and closes with an abnormal sound, and even feels unstable when the door shakes.
Solution: Use a suitable screwdriver to tighten the loose screws. If the screw holes have been worn, you can use a larger diameter screw or filler material to repair the screw holes and then reinstalled!

Problem: The hinges are separated from the cabinet door or cabinet body.
Solution: If the hinges are not damaged, re-install them firmly in the correct position using the screws and make sure they are properly tightened.

Problem: Rust spots appear on the surface of the hinge, affecting the normal opening and closing of the cabinet door.
Solution: For minor rust, use sandpaper to gently polish the rust spots, and then apply anti-rust oil or grease.

Problem: the cabinet door is stuck in the process of opening and closing, not smooth.
Solution: Clean the impurities inside the hinges, you can use a brush to sweep the dust and debris, use a cleaner to remove oil, and then apply the right amount of lubricant.

Problem: The cabinet door can not be closed properly or there is a large gap between the closed and the cabinet.
Solution: Re-adjust the installation position of the hinge, use a screwdriver to loosen the screws, adjust to the correct position and then tighten the screws.